QU-BD One-Up Y-axis spacers & clamp
thingiverse
Revised Y-drive spacer and belt clamp installation. The primary spacer is a revision from thing 212982; I am too lazy to measure the thread pitch. Reduced thickness as the original one was excessively thick, causing the belt to pass over a clamp hole. Updated on 23/02/2014: made plates thinner to fit the printing plate. Further update on 15/04/2014: incorporated changes since February - made shim and plate thinner to fit print plate. Assembly requirements include: 4 M3x16mm button head socket bolts (at least two), 4 M4x16mm bolts, and 4 M4 washers. A minimum of two M3 bolts are necessary for the lower holes to prevent belt contact.
With this file you will be able to print QU-BD One-Up Y-axis spacers & clamp with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on QU-BD One-Up Y-axis spacers & clamp.