QQ-S Pro effector house for Sherpa mini w/ Volcano

cults3d

I remixed TownDrunk's effector house for the QQ-S Pro to fit a Sherpa mini with a Volcano hotend. That should give a good flow rate if used with a good stepper motor (Moons or LDO). It is designed to be as compact as possible and stay as close to stock configuration to be able to reuse/use stock parts whenever wanted without problems. No need for reconfiguring Z-offset, it affixes the nozzle to the stock height (just a little higher actually, I gave it some extra space (0.5mm) for just in case) UPDATE: although the backpack is alright and with a 4010 fits ok (dont try using a 4020), I have made an upgrade in the form of a flying extruder bracket: https://www.thingiverse.com/thing:5410495 And it will fit any size 40mm fan! (dont know what the biggest would be, multiple 4020's maybe...) continueing... I also used 5015 fan cases that require you to cut out the old motor with blades from 2 5015's and glueing them into a new casing. This makes them smaller and lightweight. For the Sherpa mini stepper motor I made a little bracket for a 40mm fan to cool it, as it can get hot, makes sense having to pull the filament at great speed. There is a hole in the back that allows all cables to be routed behind the heatsink, put of sight. It might affect airflow very minimally but since it's a very tight airduct should be fine. Please do pull all wires through before screwing on stuff, that makes it a lot easier. Screws: M2-12mm for the 2 4010/5015 part cooling fans. M3-16mm for the rest, except the sherpa is m3-12 with a Allen key/ inbus screw hole, should have a small head out it won't fit the sherpa Mini. It is smart to 'prime' all holes with a fitting screw and use a drill at 1.5mm (M2) or 2.5mm (M3) to drill out if it doesnt fit. Also first do the extruder mounting (don't forget the hotend sock), then fix all wiring, then the screwing; first top and sherpa then fans, and last mounting to the effector plate. The whole is attached to the effector plate using M3-12mm nuts and bolts, just push the nuts into 3 spots, might require some force. If there are questions please comment. Attributions: Effector case by TownDrunk (see remix) 5015 fan cases edited from Warlocksvg (https://cults3d.com/en/3d-model/tool/qqs-pro-5015-caseadapter)