QIDI X-Plus X-Max Ribbon Cable Bracket
thingiverse
<b>Version history</b> 3.0: - Bracket angled towards extruder cover to keep the cable from dipping down. - You may have experienced that over time the cable will dip down using the V1 and V2 brackets, this angled design will prevent that. 2.0: - Improved version that gently grips the ribbon cable keeping in steady, reducing the chance of it dipping down. <b>About</b> This is a support bracket for the Qidi X-Plus and X-Max ribbon cable, it attaches to the top extruder cover. Without support, the cable dips down when it gets extended, causing unnecessary stress on the cable as well as it getting greasy from the bearings and rods. It also touches the X-axis belt. To install simply push in the tabs through the holes on the left side of the extruder cover then push down to secure it (use the lower holes) and route the ribbon cable over it. <b>Donations</b> All my designs are free, they're developed and tested in my spare time and most have source files available for easy editing. If you enjoy this or any of my other designs, a small donation is not needed but welcome. Thanks! :) <a href="https://paypal.me/humebeamengineering"><img src="https://www.paypalobjects.com/webstatic/mktg/logo/pp_cc_mark_111x69.jpg" border="0" alt="PayPal Me"></img></a>
With this file you will be able to print QIDI X-Plus X-Max Ribbon Cable Bracket with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on QIDI X-Plus X-Max Ribbon Cable Bracket.