Qidi Tech 1 Filament Tube Support Guide Rear

cults3d

Qidi Tech 1 (possibly X-Pro as well) filament tube support/guide assembly. UPDATE 03/04/18 - added left and right versions of the tube guide arms that include 2.5mm pilot holes - drill out after printing and install M3 set screws. Be careful you don't squash the PTFE tubes and disrupt the filament path. Please note this assembly replaces basically everything at the back of the machine relating to the guide tubes - including the silly clips let let things move up and down, and even the clamp that holds the wire bundle in place. The top side of the assembly takes 6mm OD PTFE tube (as supplied) and 4mm OD PTFE tube from the bottom side (not supplied) - if you don't have the 4mm tube, the filament can just go straight up - I use the 4mm to guide a longer run to external spools.