qidi 6.08 mono resin vat (left side spout)

thingiverse

###NOTE: I have tested the installation & tensioning of an FEP sheet and tested the assembly for leaks using water (no leaks found), but I have not yet used it for a print in my printer. I may wait a few days to see if it remains stable and doesn't warp. NOTE: This version has the pour spout on the front left. The OEM version was on the front right. See the V3 Thing (https://www.thingiverse.com/thing:5186643) for a right side front pour spout assembly. This thing consists of components to assemble a resin vat for use with a Qidi 6.08 Mono resin printer. This design uses all M3 flat head (aka countersunk) screws. The FEP frame uses either 28x M3 6mm threaded inserts (C1) or 28x M3 nuts (C2). The vat can be printed to use either 8x M3 6mm threaded inserts (version A1) or M3 nuts (version A2). A high wall count is suggested for wall integrity. I used 7 walls. I also used Cura settings to print 100% infill in the areas immediately surrou8nding the threaded insert/nut locations on the vat. I used 20% infill for the rest. A zip file with all files is included in the Things file list. Parts List by Alpha reference: A1 - vat with thermal inserts A2 - vat with M3 nuts B1 - top FEP frame 5mm thick B2 - top FEP frame 4mm thick C1 - bottom FEP frame 6mm thick with thermal inserts C2 - bottom FEP frame 6mm thick with M3 nuts C3 - bottom FEP frame 4.5mm thick with M3 nuts D - FEP installation jig 12mm thick FEP support with base D2 - FEP installation jig 12mm thick FEP support without base This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/k43sZVHbOEF