QI Wireless Charger "Blank"

cults3d

This is an incredibly cost-effective and efficient way to create a powerful (10W) wireless charger that's also visually appealing! It will charge any phone that's compatible with wireless charging, and I've tested three identical internal boards for over a year without issue. The model is designed specifically to house this wireless charging board: https://s.click.aliexpress.com/e/o3s0OdT2. This single-piece design is optimized to be as thin, small, and lightweight as possible, using less plastic than a multi-part model would require. To assemble the charger, it's essential to pause the print just before the first top layer is complete, insert the board, and then resume printing. Many slicers have a "stop at layer" feature that makes this process extremely easy. If you have any questions or encounter problems, please don't hesitate to ask – I'll be more than happy to help. Important note: The charger will not work if the board is not inserted during the print process. Unfortunately, there's no way to insert the board after the fact. To use this model, you'll need the required wireless charging board, which can be found here: https://s.click.aliexpress.com/e/o3s0OdT2. Be aware that this model may require longer bridging times and more cooling during printing. Not all phones are compatible with wireless charging, so be sure to check your device's compatibility before proceeding.