Qav135 Brushless MiniDrone under 250 gr

thingiverse

This is a Work in Progress to create the fastest 3D printed under 250gr Quadcopter for racing. The files include multiple versions: horizontal position for antenna, vertical position for antenna, eachine camtx version, and vtx+camera version. The drone is designed to run on 1306 motors with 3-inch props, using a 4s battery. Parts List: Hardware: Standoffs 20mm M2: https://goo.gl/iDUlnD Screws M2: https://goo.gl/XEv3ht Local Purchase (Canada, Toronto): Motors: http://rotorev.com/emax-rs1306-racespec-motor-cooling-series-3300kv/ Escs: http://rotorev.com/spedix-es25-speed-controller-2-4s/ FRSky TX: http://rotorev.com/frsky-xm-plus-mini-sbus-non-telemetry-full-range/ Props: http://rotorev.com/dys-3x3x3-bullnose-props-2-cw-2-ccw/ Battery: http://rotorev.com/dinogy-500mah-4s-14-8v-65c-lipo-battery-xt60/ Camera: http://rotorev.com/diatone-600-tvl-120-miniature-camera-mount-black/ Camtx: http://rotorev.com/micro-0-25mw-50mw-200mw-switchable-aio-5-8g-72ch-vtx-600tvl-1-3-cmos-fpv-camera/ Antenna: http://rotorev.com/foxeer-5-8g-circular-polarized-omni-rhcp-sma-antenna-mini-orange/ VTX: http://rotorev.com/eachine-vtx03-super-mini-5-8g-72ch-0-25mw-50mw-200mw-switchable-fpv-transmitter/ Banggood Option: Motors: https://goo.gl/5mhqmP 3-inch Props: https://goo.gl/Oesepw Escs: https://goo.gl/dzT844 MiniFC: https://goo.gl/Tlzg7N FRSky Receiver: https://goo.gl/IC0yWm Battery: https://goo.gl/oKS8Ze Battery Strap: https://goo.gl/5AgjWU Camera Holder: https://goo.gl/Ryx2C8 Camera: https://goo.gl/0FYzYx Mini VTX: https://goo.gl/DoX3EZ Ipex Adapter: https://goo.gl/8afC6E Short Antenna: https://goo.gl/VnrXYx Camera+VTX All in One: https://goo.gl/UPkp2Z If you want the frame 3D printed locally, you can order it through my 3DHubs page: https://www.3dhubs.com/service/221443. Print Settings: Printer: Anet A8 Rafts: No Supports: Doesn't Matter Resolution: 0.1 Infill: At least 40% Notes: I used PETG for heat resistance and hardness. You can use any material you want, but remember that PLA will melt next to VTX or hot motor/ESC.