QAV 250 dual antenna holder

youmagine

I designed this specifically for the Spektrum dual-antenna receiver on my QAV250. Initially, I intended to mount it behind the Lumenier Vibration Damping Camera Plate using the second set of standoffs, but there are several alternative mounting options that work well (Check out pics for examples of all three): 1. It can be mounted using the screws on top of the 2nd or 3rd set of standoffs with the screws facing forward or backward. If you're not using the camera plate, this is your best bet. 2. It can also be mounted using the silicone isolators from the camera plate. In this case, screwing the isolators into the standoffs is the way to go. This moves the isolators a bit further out than they are supposed to be, but being made of silicone isn't an issue at all. 3. Alternatively, it can be mounted underneath the camera mount using the second set of standoffs and the isolators installed in their designated slots. However, the clearance is quite tight, so I might modify the design slightly to increase the antenna tubes' spacing and give the camera plate a bit more room between them. EDIT: A revised version (V2) with wider antenna spacing has been added as an option to the original one. This should allow the antenna holder to be mounted underneath the camera plate. This was designed specifically for 3mm or 1/8" antenna tubes. The holes are slightly out-of-round on purpose (only by .1mm). This ensures a snug fit on the antennas while still making it easy to remove them for travel or storage. If you decide to print this, please post in the comments and let me know how it fits. The current design is the perfect size when printed out on my printer, but that might not be the case with other printers**