Pyramid A1.1 Control Board Box/TFT35 LCD Bracket

thingiverse

put together a new box that will let you access the OEM board (MKS Robin Nano V1.2) from the top side and also move the LCD Display to the side so is not covered by the bed during printing. The box is secured to the frame using T-nuts and the box's lid is secured using M3 screws. The clearance between the Y axis wheels and M3 screws that I used is tight but they do not make contact with the Y-axis wheels. I used two 4010 Noctua fans in order to make it quieter. For the LCD screen, the bracket is attached to the frame using the same screws that are part of the frame support legs. The LCD is secured to the bracket using M3 screws and nuts. In order to move the LCD to this location, you are going to need a FPC 32 pin, 1.0mm pitch, forward direction ribbon cable, at least 40 cm long. I got mine thru eBay. Feel free to remix this model to meet your needs.