Puzzle Cube 3D Cross

thingiverse

It is a puzzle in which you must fit and slide some pieces within a frame to form a perfect cube. It has a single resolution and requires spatial vision. Still, it is a puzzle that I think anyone could solve. The design of the pieces is not mine, I have modeled the pieces with Fusion 360 based on those of a wooden puzzle that I have had. The frame and all the puzzle pieces have a tolerance of 0.3mm, if this is a problem for you just let me know in the comments. I have also added a bezel to make it more pleasant in the hands, the original wooden puzzle did not have it. I have designed it so that it can be completely printed without supports. But there are some things to keep in mind: - Piece 1 and pieces 3 to 7 can be printed without supports or complications, just rotate them and look for the most suitable face. - Piece 2 can be printed without supports if you rotate it, I have attached a capture so you can see the position more clearly. When printing it in this way, no part is suspended in the air and all the wall inclinations are at 45º. - The cube or frame with the truncated corner is designed to be able to be printed without supports if you use this corner as a base, here the walls are less than 60º inclined and it could be something more difficult to achieve, but hey, I am not an expert in print and I have succeeded. I have attached a screenshot explaining how to use this base corner in Cura, if you use any other laminator, surely it has a similar tool. - If you did not like the appearance of the cube with the truncated corner, you also have an untruncated version available, the truth is that I have not tried to print it, but surely supports or a very well calibrated printer are needed to be able to print the upper bridges. Do not hesitate to comment if you have any questions or suggestions. If you print it, you will do me a favor by Posting a Make. And remember to give Like to help me! Thank you so much for everything!