Puzzle box 4 - Two side maze

myminifactory

This box is one piece of a six-part collection, each measuring 3*3*3cm. All boxes have lids that come off through unique mechanisms. They're ranked from 1-6 based on difficulty. Assembling and viewing the inner workings removes some mystery, but they remain fun to solve and give as gifts for friends to try. Printing settings: supports are not needed due to overhangs; infill is at least 20%. A higher infill setting is recommended for the peg. Extra materials include a 1.5mm rod (a toothpick). Assembly involves sanding down a pin so it slides freely through a hole in the lid, then scraping and sanding slots in the case to allow easy movement of the lid and pin. To put the lid back in its original state, follow the solution steps in reverse. Solution: 1) Move the lid to its fullest extent and set it on its side; if not possible, try again on the other side. 2) Once moved, check for a different direction; repeat this process twice until you reach another dead end. 3) Flip the box over and move it again; you should now be able to change directions. 4) Repeat this step two more times, following a winding pattern until you can remove the lid.