Push Opener (Remix)
prusaprinters
I saw and printed sabesnait's Push Opener immediately. Impressive functionality and design!Thanks for sharing!However, this bottle opener didn't work reliably: the cap came loose when opening 2 out of 3 bottles, and the rubber ring easily detached from its holders. So, I revised all parts. A few more grams of filament made the opener much sturdier. Adding threads to the lid keeps it secure. I redesigned the rubber ring holders for better retention.Here's what you need for that:2 x M3 x 20mm screw1 x M3 x 30mm screw1 x rubber ring (approx. 25-30mm in diameter)Tip: If you have already printed the parts of the original and don't have any issues with the rubber ring, only with the lid coming loose, then you don't need to print the internal parts from my remix. The original internals fit into my opener. Printing informationThe STL files are correctly aligned.Layer height: 0.2mmPerimeter: 3 with 0.6mm nozzle; 4 with 0.4mm nozzleInfill: 20% (Gyroid)Support: none, except for pushOpener_inner (see picture below)I recommend organic support just for the internal surfaces.If you like the colored layout that you see in the photo, you can achieve it with the following color changes when printing pushOpener_outer:start with orangeat layer #31 (6.20mm) - grayat layer #273 (54,60mm) - orangeat layer #304 (60,80mm) - grayThen print pushOpener_top: orange Assembly InstructionsAfter you have printed all parts, assemble them following these steps: I am looking forward to your Makes! :-)If you like this design, feel free to check out my others here.
With this file you will be able to print Push Opener (Remix) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Push Opener (Remix).