Punta Mogotes Lighthouse (Faro de Punta Mogotes)

prusaprinters

<p>Started as a Fusion 360 exercise and ended as a copy of the Punta Mogotes Lighthouse.</p> <p>Based in Mar del Plata, this south Atlantic lighthouse has 36 meters in high and is an iconic structure. Designed in France in 19th century was key to signal the presence of underwater rocks that caused several wrecks inn the area.</p> <h3>Print instructions</h3><p>This model prints in several parts with no need of supports.</p> <p>Printing is easy and the only part that wil needd more attention is "The Hollow Thing.stl" where 0.07 or 0.1 layer height is better and avoiding stringing is key.</p> <p>The floor is detachable to leave the option of adding a rotating light afterwards.<br/> And the stairs is dividede by two, in case you're not interesten in printig it all.</p> <p>Most part will snap fit with the exception of the lower and upper towers that might need some help with glue.</p> <p>for correct fit pls add elephant foot compensation in your slicer.</p> <p>The three pitutos are to align and glue top tower with medium tower.</p> <p>Low and medium tower has in the name the height where change color shoud be placed to look like the photos.</p> <p>While windows and double blinds fit in the holes the single blinds are to be glued. You can mix them as you like.</p> <p>Total printing time was in my case around 29 hrs. Mostly 0.2 and 15% infill.</p> <p>Hope you like it and look forward seeing your makes!</p>