Pulley GT2-60T

thingiverse

Instructions for Customized Bike Pulley Using the following settings: Pulley bolt diameter is set to 18. Metric nut hex size is enabled. Pulley top hat height is specified at 7.5 millimeters. Pulley bottom hat height is set to 8.1 millimeters. Metric nut flat count is defined as 5.7 units. Metric bolt diameter is set to 3.2 millimeters. Tooth count for the gear is determined to be 60 units. Number of nuts to secure the assembly is chosen at 2. The retainer option is activated. Idler functionality is selected. Additional tooth width is added as 0.2 units. Metric nut depth is specified at 2.7 millimeters. Gear profile is designed for a count of 12 units. Retainer hat height is established at 1.5 millimeters. Motor shaft diameter is determined to be 5 millimeters. Additional tooth depth is incorporated with a value of 1 unit. Nut shaft distance from centerline is calculated to be 1.2 millimeters. Idler hat height matches that of the retainer, set at 1.5 millimeters. Metric nut angle aligns precisely with the horizontal, set at 90 degrees.