Puch hood emblem

prusaprinters

It a replacement hood emblem for a Puch g wagon/army truck. Print Settings Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 2mm Infill: 100 Filament: MatterHacker PLA green but spray painted black Notes: I used the print settings that Devin Montes from make anything used to make a hood emblem for his BMW. Print at 100% scale. Post-Printing Step one - I found the center of the piece then marked it. Step two - Then took a 10/32 screw cut it down to a smaller length. Step three - I drilled a hole slightly smaller then the screw and then very carefully took pliers and a really strong lighter or a torch then screwed it into the hole of the emblem. This helps the screw stay into the emblem and be stronger. Step four - I spray painted it black How I Designed This I designed this by drawing it first making each part a different color thats going to be at different layer. Like my image. I then uploaded to http://3dp.rocks/lithophane/ and selected domed top shape then under setting made sure that it was on negative and left everything else the same then downloaded it and when in cura I scaled it to 2 inches in diameter and sailed it to 36% from Z axis. Theres probably a better way to do this but I don't know how. But I fixed it so it can be printed at 100% scale. Category: Replacement Parts