PTFE tube joiner with coupler

thingiverse

###This is a Remix of My BMG Clone Adapter. https://www.thingiverse.com/thing:4192100 A PTFE Tube Joiner Using the CR-10 PTFE Tube Connector. You Should Be Able to Join Two Regular PTFE/Capricorn Tubes or a Mix of Those Tubes. ______________________________ ###info: ______________________________ I Uploaded Five Parts of the Same Design with Various Measurements, and the One That Worked for Me Is the T = Thread 11mm and PTFE = Tubing Hole 5mm. I Also Added Other Than This Measurement Including: T11-PTFE5.5, T11-PTFE4.3, T10-PTFE5.5, T10-PTFE5, and T10-PTFE4.3. Please Use What Fits Your Needs. Please USE IT WITH CAUTION AND AT YOUR OWN RISK. If Not Printed Correctly It May Fail, and **Please Put Some 2 Part Epoxy on the Threaded Part** to Hold It in More Securely Other Than That the Thing Is Working Great for Me. _________________ ##**Instruction :-** 1. Make Sure You Have a Clean-Cut Where You Want to Join These Tubes. 2. Insert the First Tube Only Halfway (Mark 26mm Then Insert It to the Mark). 3. Insert the Second Tube the Other Half and Make Sure You Push It a Little Bit More (Not Too Much) to Make Sure Both Tubes Connect with No Issue. 4. Make Sure There Is Nothing Touching the Couplers or Anything in Its Way; You May Want to Put Tape on It (The Tape Part Is Not Necessary, It's Just in Case).