PSVR AIM Stock top/bottom mount

thingiverse

This is a custom Stock for the new PSVR Aim Controller. All buttons are still accessible after mounting this stock. This stock is still a prototype, so it might change slightly in the future if necessary. Update May 21st, 2017: Added mounts to the bottom. Simply print the mount files with the bot at the end instead of the usual ones. To build one of these stocks, you will need: 2x AIM_stock_mount_A or AIM_stock_mount_A_bot 2x AIM_stock_mount_B or AIM_stock_mount_B_bot 1x AIM_stock_headmount 1x AIM_stock_head 8x M4 screws with a minimum length of 10mm and a maximum length of 16mm 8x M4 nuts 2x aluminum square shape tubes with dimensions 10x10mm, both with a length of 500mm for the top mounts and 350mm for the bottom mounts The tubes shown in the pictures are 500mm long. You may want to make them longer or shorter, but this length seems comfortable. Assembly: Place all nuts into their corresponding hex shaped holes and attach AIM_stock_mount_A and AIM_stock_mount_B to the controller slightly loosely. Make sure they can still move a little bit. Then insert one of the tubes into both mounts and place them like on the pictures. Fasten the screws that hold the mounts together, but not the ones for the tubes. Remove the tube and push both mounts as far as possible into the headmount. Screw the head onto the headcount with the remaining two screws and put the stock back in its mount. Be careful not to scratch the controller with the aluminum! Finally, fasten the 4 screws that hold the tubes in place and you're ready to shoot!