PSVR Aim Controller Mounting Clips

thingiverse

These mounting clips are designed specifically for use with the Playstation VR Aim Controller. I created them to allow me to mount my Aim Controller under a cabinet surface, keeping it out of sight when stored and easily accessible when booting up my Playstation and plugging in my PSVR headset. The design also positions the controller to be conveniently charged using the PS4 USB port. These clips are intended for use with medium-sized 3M Command Strips. The clips shown in the pictures, as well as the ones I am currently using, are .085" thick. However, I have also provided .100" thick files in case you need more stability. My clips are made from ABSPlus and appear to hold the controller securely. To use these clips, position the controller so that it is held toward the bottom portion, with the top cross member resting against the top of your cabinet or coffee table. Then, slide the top part into the back horizontal clips and swing the bottom part up into the vertical clip(s). I am using an earlier version of the vertical clip in the picture provided, which works but requires you to pull the controller slightly toward you for it to fit properly. In the rev A version, I attempted to correct this issue, but I have not tested it as I don't currently have easy access to a 3D printer. ### Parts Description: * clip_085_horiz - Horizontal clips used at the back, .085" thick. * clip_085_vert - Vertical clip used at the front, .085" thick. * clip_085_vert_A - Version A of the vertical clip attempting to correct the design flaw mentioned earlier, .085" thick. * clip_100_horiz - Horizontal clips used at the back, .100" thick. * clip_100_vert - Vertical clip used at the front, .100" thick. * clip_100_vert_A - Version A of the vertical clip attempting to correct the design flaw mentioned earlier, .100" thick. You can use these clips in any configuration and combination you prefer. Options include using all vertical or horizontal clips. The models are designed in inches.