PS4 camera TV mount for VESA fixing holes

thingiverse

<h2>The problem</h2> I had a problem with PS4 camera mount on the TV: it have full screen picture without any frame, and existing camera mount clip needs some place on the frame. It looks horrible and annoing during film watching. I also tried to use 2-sided adhesive types to fix the clip on the back side of screen - it's always fall after some time. And wall mount is also no-go. <h2>Solution - using VESA</h2> So, I decided to use VESA mount holes (any TV have these on the back - to fix holders/brackets). I also used the part of PS4 camera mount designed by <b>glowallp<b> https://www.thingiverse.com/thing:2526750 <h2>Materials</h2> You'll need: - printed parts - 2х M6х12 screws - for VESA mount holes - 2х M5х12 screws + M5 nuts - for upper mount - 2х 5/6mm aluminium rod - superglue or dichloromethane to glue parts together. <h2><b>Cut the rod - lenght</b></h2> Let's: <b>a</b> = VESA mount size - distance between two holes (300mm in my case) <b>b</b> = desired height of the camera (I've measured 380mm) then the length of aluminium rods can be count as SQRT ((a/2)^2+b^2) =~ 401mm I also subtracted 50mm for plastic parts and finally <b>cutted two 350mm parts of aluminium 5mm rod. <h2>Print and assembly</h2> Print: - 4 eyelets (choose for your rod diameter - 5 or 6 mm) - the base - holder and pivot (2 parts) from https://www.thingiverse.com/thing:2526750 The holes in eyelets for 6mm screws (for VESA) must be slightly bored by any tool. The camera bracket, pivot and base must be glued together, then connect eyelets with rods, use glue or any other material if needed. Complete the assembly by attaching eyelets to VESA and base by screws. That's it! Hope this helps somebody. )