PS2 2.5" HDD & SSD converter/adapter/mount/caddy

prusaprinters

<h3>Design</h3><p>I designed a converter for a 2.5" HDD to fit in my PS2 (with the network adapter, and the SATA mod) without it floating around.<br>The bracket slides into place, where it holds firmly.</p><h3>Hardware</h3><p>All you'll need are some small screws to mount the HDD or SSD to the bracket.<br><i>These need to be 1mm flat countersunk heads, otherwise they stick out too far and wont fit inside!</i></p><p><strong>Update 7/20/21</strong><br>I discovered I had accidentally uploaded an older exported version, I fixed some tolerances, and added the "v2" in here. If you did print the first one, you may need to file down the top of the support legs a little bit, that's all.</p><p><strong>Update 10/16/21</strong><br>It was brought to my attention, that the GameStar (clone) adapter has <i>slightly</i> different dimensions vs the original. I have added a variant which fits on this, and added a hole on the side of both for easier access to the front left screw.</p><p>Category: Video Games</p>