Prusa Spool Holder (MK3/S/+) compatible screws for Prusament Masterspool Final Edition

prusaprinters

<p>This is a set of screws which fits <a href="https://www.prusaprinters.org/prints/58064-prusament-masterspool-final-edition">Sonic_2_1's Prusament Masterspool Final Edition</a>. They are just their screws but the middle bit is removed to make room for the bars of the Prusa spool holder that comes with the MK3/S/+. The ones from the original model are only compatible with the Mini+ and don't fit the MK3/S/+ spool holder.</p><p><i>Please post a Make of this print if you liked it and it was useful to you. Thank you!</i></p><h3>&nbsp;</h3><h3><strong>Please note</strong></h3><p>Don't be confused by the preview of the 3D model here on PrusaPrinters. I removed the inner part of the screws with a negative volume right in the .3mf-file. Those negative volumes are being rendered in the preview, they will NOT be printed.</p><h3>Print Settings</h3><p>Print settings do not really matter. Just go with standard settings of e.g. a 0.2mm layer height print.</p><p>However, I suspect printing in PETG will make for a very high-friction experience when trying to screw both halves together. Probably use another kind of material. I used PLA.</p>