Prusa MK3S Raspberry Pi Camera Mount - by Clip-Fastening

thingiverse

The securing of this bracket is accomplished through clip-fastening! This camera mount was conceived by drawing inspiration from various mounts available on Thingiverse. As none of these met my exact requirements, I decided to design a custom mount. To fulfill the following conditions: * No adjustments or modifications should be necessary to attach the mount to the printer. * No drilling into the printer is required. * The camera must have sufficient distance to capture both the printer display and print object simultaneously. * Integration of the ribbon cable must be achieved. The extension parts were inspired by Thingiverse's 3188580. A video demonstrating a short version (2 elements) and long version (5 elements) can be viewed below: https://youtu.be/AEP44_I5pRg The long version offers the capability to capture both the printer display and print object simultaneously in the camera image. The camera case and connector were adapted from Thingiverse's 3121052. This choice was made due to the precision alignment offered by the ball head on the connecting piece, as well as the front clip for securing the camera. Required hardware includes M3x20 screws (dependent on the number of extensions), one M3x25 screw, nuts, and washers. It is highly recommended to utilize washers, despite the added complexity, as they will significantly improve the mobility of each element.