Prusa MK2(s) upgraded extruder cover for angled print fan

prusaprinters

<p>This is a small upgraded extruder cover for the Prusa I3 MK2(s) which allows to angle the print fan the same way as on the MK2.5(s) or MK3(s). It has the same mounting holes and features as the MK3s extruder cover and thus allows to use the same fan-shroud and print-fan-support</p><p><strong>Required for assembly:</strong></p><p>2 x M3x8 (to fix the fan support and the fan shroud to extruder cover)</p><p>2 x M3x20 (to fix print fan)</p><p>2 x M3 hex nut (for print fan)</p><p>1 x M3 square nut (for fan shroud)</p><p>1 x M3 threaded insert (for fan support)</p><p>fan shroud: <a href="https://github.com/prusa3d/Original-Prusa-i3/blob/MK3S/Printed-Parts/STL/fan-shroud.stl">https://github.com/prusa3d/Original-Prusa-i3/blob/MK3S/Printed-Parts/STL/fan-shroud.stl</a></p><p>fan support: https://github.com/prusa3d/Original-Prusa-i3/blob/MK3S/Printed-Parts/STL/print-fan-support.stl</p><p><strong>Print settings:</strong></p><p>0.2mm layer height</p><p>4 perimeters</p><p>30% cubic infill</p>