PRUSA MINI+ Z Axis Extra Height Adaptor

prusaprinters

<p>I was quite surprised how this was over looked, but its a super easy fix :D</p><p>&nbsp;</p><p>No need to dismantle the Z top end or the Extruder assembly.</p><p>This little adaptor fits comfortably between the extruder and z axis &nbsp;mounts.</p><p>&nbsp;</p><p>The issue is that the extruder fowls on the z axis top, this little adaptor moves the assembly away from the other, which in turn gives you more z axis height!</p><p>The real fix is to update the z axis top to remove the excess material, but that involves dismantling your entire z axis to incorporate the fix,</p><p>&nbsp;</p><p>Additional hardware required,</p><p>Longer screws or&nbsp;</p><p>same screws and 10mm standoffs.</p><p>the adaptor accommodates for both</p><p>&nbsp;</p><p>Can print in draft 0.25mm (standard settings)</p><p>0.4mm nozzle,</p><p>20% in fill</p><p>Printed in PLA+, can use PETG also to match</p><p>Results are super pretty see photos :D</p>