Prusa MINI Retraction Value Test

prusaprinters

<p><i>Warning: please make sure gcode files are safe for your printer before using them. I take no responsible for any damage occur by the files. Use them at your own risk.</i></p><p>I couldn't translate retraction value from <a href="https://teachingtechyt.github.io/calibration.html#retraction">https://teachingtechyt.github.io/calibration.html#retraction</a> for my Prusa MINI+,</p><p>So, I made a test out of teachingtechyt's retractiontestvs stl file (https://teachingtechyt.github.io/files/retractiontestv2.stl)</p><p>I cut the tower down to 1 block and into several gcode files then mix them together since I can't find a way to use prusaslicer to change retraction length between the print.</p><p>Gcode files were created from default prusaslicer profile “Generic PETG @MINI”, changing only retraction length. Retraction length +0.5 following printing order.</p><p>Tested on Prusa MINI+ with smooth spring steel sheet with PETG. The parts are very sticky to the sheet so I cut the base to save some time and filament.</p>