Prusa Mini Raspberry Pi Model 3 A+ & RPi 4 Mounted Case

prusaprinters

<p>I was looking for a simple solution to mount the RPi Model 3 A+ to my Prusa Mini but could not find any low profile solutions. So I made a quick modification to one and used the below parts:</p> <p>Parts Needed to Mount the case</p> <ul> <li>(2) M5 x 10mm bolts</li> </ul> <p>Parts using in this kit are from the following kits:</p> <ul> <li>Bottom Case by Adafruit (see downloads for modified STL) <a href="https://www.thingiverse.com/thing:546427">https://www.thingiverse.com/thing:546427</a> </li> <li>Top Case by pteppic - <a href="https://www.thingiverse.com/thing:3670653">https://www.thingiverse.com/thing:3670653</a> or if you are not planning to use a fan try out my remixed version in the model files below</li> <li>3030 Thread M5 Nut by BensHacks- <a href="https://www.thingiverse.com/thing:3998406">https://www.thingiverse.com/thing:3998406</a></li> </ul> <p>If you are looking for a raspberry pi 4 case, I added some holes to the Raspberry Pi 4 Case - Slider Case by dtnavida:<br/> <a href="https://www.thingiverse.com/thing:3779674">https://www.thingiverse.com/thing:3779674</a></p> <p>You should be able to use the RPI 4 Slider case along with the stl of 3030 threaded M5 and 2 M5 x10mm bolts. Note: I do not have a rpi4 to test this with but if you have success with the print please comment.</p> <h3>Print instructions</h3><p>I printed this in 0.15 layer height, no supports and on the mini with the provided gcode. <em>Note: If you have a pi 4 please see STL files.</em></p> <p>Or you can use the STLs to customize the print to your liking. You will need to print each part plus 2 of M5 threaded nuts.</p>