Prusa Mini Raspberry Pi Camera Mount

prusaprinters

<p>A camera mount for the Prusa Mini. If you use octoprint or any other software you want to use with a camera to monitor your 3D print, you can use this camera mount. The mount clips over the stepper motor on the Y axis.</p> <p>The only thing you will need next to the printed parts I a set of M3 nut &amp; bolt (which is long enough)</p> <p>I've added a camera mount with support for a NeoPixel 12 LED ring. Which you can control with octoprint and the status LED plugin. I manually soldered 4 angled pins on it and glued it to the mount with superglue.</p> <p>The wiring is as followed:</p> <p>USB ground to ground neopixel-ring (black wire)<br/> USB VCC to power neopixel-ring (red wire)<br/> Pin 10 (or any pin you use with the Status LED plugin) to the DI (digital in) on the neopixel-ring (yellow)</p> Category: 3D Printer Accessories