Prusa Mini+ Pi Camera IR Flexi Adapter for X Axis

prusaprinters

<p>This is a remix from the adapter that sits on around the motor for the X axis.<br>I adapted this to support the <a href="https://www.prusaprinters.org/prints/25205-flexi-arm-camera-mount">flexi-arm camera adapter</a> and the <a href="https://www.thingiverse.com/thing:4153416">Picam IR Flexi Mount</a> so that I can mount the Raspberry Pi Camera on the X Axis engine.&nbsp;</p><p>The goal is to take advantage the Z axis height, which is where the X Axis motor sits on. This will allow the camera to keep up with the current Z height making the view of the print much clearer.</p><ul><li><strong>You can print this without supports</strong>, but bear in mind that the upper frame part will be printed as bridge, so it may topple a bit - it should not interfere with the design.</li><li><strong>If you want to print with supports</strong>, you should use the support paint tool and allow supports to be printed on the model with <strong>0.2mm Z clearance</strong>.</li><li><strong>You can either use a nylon fastener </strong>to tighten the frame onto the motor.</li><li>…<strong>Or you can print the included fastener</strong>. It should fit both sockets, fastening the frame onto the motor.</li></ul><h3>Files included</h3><ul><li>I included the *.skp file (SketchUp project) in case you want to tweak this.</li><li>I included all the STLs required to print this, but you should visit the makers from the other original parts, as they may have updated them with improvements.</li><li>If you want, you can separately download the different parts from the other makers, namely:<ul><li>Links and adapters from <a href="https://www.prusaprinters.org/prints/25205-flexi-arm-camera-mount">flexi-arm camera adapter</a></li><li>Raspberry Pi Camera parts from <a href="https://www.thingiverse.com/thing:4153416">Picam IR Flexi Mount</a></li></ul></li></ul><h3>Print instructions</h3><ul><li>Printed with <strong>0.20mm QUALITY</strong> profile with<strong> 15% infill </strong>(default settings).</li><li>Printed without supports, but read instructions above if you want to use supports.</li><li>Printed with <strong>PETG @ 250º / 90º </strong>using the standard PrusaSlicer settings for Generic PETG.</li><li>Don't print all parts at once; print the links separately at least;</li></ul>