Prusa Mini Mosquito Mount

prusaprinters

<p>Screws that are needed are 2 M2.5x20mm for the mosquito and 1 M3x17 or put a 1mm spacer on the original screw that goes through the middle of the x carriage. You will also need 2 m3 nuts. I cut a piece of PTFE tube flush with the opening to sit under the prusa fitting. Super easy upgrade all things considered.</p> <p>v1.1 has been uploaded and tested, it works great! Will document the needed screws soon.</p> <p>Also uploaded the IPT and STP for anyone to modify for their own use.</p> <p>the first version was tested and had some issues. the new version addresses the issues that I was able to fix. Will test tonight and update my results.</p> <p>I ran into issues with jamming in my Prusa Mini. From what I have been seeing all over the place it seems the hotend might be part of the problem. I happen to have an extra Slice Engineering Mosquito on hand so I threw together a replacement for the hotend that should bolt in place. You will need at least 2 M3 nuts and hardware to attach the mosquito. Also a short piece of TPFE tubing to go under the boden tube piece.</p> Category: 3D Printer Parts