Prusa Mini Mosquito Mount

thingiverse

Screws needed are 2 M2.5x20mm for the Mosquito, along with 1 M3x17 or adding a 1mm spacer to the original screw passing through the x carriage middle. Two m3 nuts will also be required. I trimmed PTFE tube flush with the opening to sit under the Prusa fitting. This upgrade is straightforward despite initial challenges. v1.1 has been uploaded and tested successfully. Documentation for necessary screws is forthcoming. The IPT and STP files are available for modification purposes. The first version was tested, revealing some issues that have since been addressed in the new version. Further testing will be conducted tonight, with results to follow. Jamming problems arose in my Prusa Mini. Observations indicate that hotend malfunctions may contribute to these issues. Fortunately, I possess an extra Slice Engineering Mosquito, allowing me to create a replacement hotend that should fit seamlessly. At least 2 M3 nuts and hardware are necessary for attachment, along with a short piece of TPFE tubing under the boden tube section.