Prusa Mini Mosquito Hotend Mount
prusaprinters
<p> Remix of Mosquito Hotend mount for the Prusa Mini + from <a href="https://www.printables.com/model/58396-prusa-mini-mosquito-halterung">CrisPersi</a>. Adds the use of the stock Bowden tube fitting and Super PINDA bracket. No change in Bowden tube length or nozzle position compared to stock. Uses a 13-13.2mm Teflon tube and the following additional fasteners:</p><p>2 X M2.5 X 16mm Flat Head Cap Screws</p><p>2 X M3 X 14mm Socket Head Cap Screws</p><p>1 X M3 X 6mm Socket Head Cap Screw</p><p>5 X M3 Heat Inserts (~4mm OD x ~4mm OAL)</p><p> Added a version for an M6 Bowden tube fitting. It uses the 2 long M2.5 SHCS that come with the hotend instead of the M2.5X16 FHSCs. Teflon tube is 9.0-9.2mm for this version. Everything else is the same as above.</p><p> If you would like to increase part cooling, I recommend upgrading the stock fan to the 7.38 CFM LDO fan sold by Filastruder. So much more air and no need to change the X-Carriage for a new duct! The change to this fan really woke up my part cooling system and highlighted how well the stock Mini+ parts cooling duct was designed. The fan is a direct bolt-on, runs 0 to 100% speed without causing any errors and is very quiet (29dBA). I have found no airflow issues with or without the Slice Eng Boot installed. </p><p>Link=> <a href="https://www.filastruder.com/products/ldo-5015-5v-blower-fan-df5015h05s">https://www.filastruder.com/products/ldo-5015-5v-blower-fan-df5015h05s</a></p><p> </p>
With this file you will be able to print Prusa Mini Mosquito Hotend Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Prusa Mini Mosquito Hotend Mount.