Prusa MINI/MINI+ Squash Ball Feet System & Spool Holder

prusaprinters

<p>Remix of Squash ball feet for Prusa Mini. All brackets bolt into aluminum extrusions and support the electronic's box.</p><h4>Highlights:</h4><ul><li>Massive Noise Reduction</li><li>Improved Stability (Lifting the magnetic sheet won't tilt the printer)</li><li>6 Support Points without increasing operational footprint.</li></ul><p>&nbsp;</p><p>This is inspired in <a href="https://www.thingiverse.com/thing:4752965">https://www.thingiverse.com/thing:4752965</a> from jrjonescan, I love the weight distribution and support points choice. But it was too bulky, so I recreated the low profile from Vektor.</p><ul><li>Print 3x Single Foot (If you are going to use the Spool holder print only 2x)</li><li>1x each other model</li></ul><h5>You will need:</h5><ul><li>6x Squash Balls (double yellow dot)</li><li>5x M6 x 12mm Bolts</li><li>5x M6 T-Nuts</li><li>*If using the spool holder setup, you will also need:<ul><li>2x 608 bearings. Alternatively, you can reuse the originals from the mini Spool Holder.</li><li>1x of the Original Prusa Mini Foam Feet (The spool holder includes a slot)</li></ul></li></ul><p>&nbsp;</p><h5>Spool Holder:</h5><p>This is a remix of the popular Spool Holder from Max with the Squash Ball foot + the "Filler" Filament Roller.<br>&nbsp;</p><h3>Print instructions</h3><ul><li>.25 layer</li><li>3+ perimeters</li><li>±30% infill</li><li>Minimal Support ( set overhang threshold to 5º, so supports is added only to critical areas)</li><li>PLA / PETG</li></ul>