Prusa MINI/MINI+ Hotend Pencil Cup

prusaprinters

Building instructions are below, just in case you may need them.InfoThis is a Prusa MINI/MINI+ pencil cup! The cup has the hotend attached to the side and not only that makes it seem like a Prusa MINI/MINI+ pencil cup, the cup itself is an enlarged version of the metal beam giving support to the Z and Y-axis of the Prusa MINI/MINI+! The cup has a cilinder shaped hole that has a diameter of 7,5cm (2.95 inches) and a height of 8,5cm (3.34 inches). But, there is more to this pencil cup! Not only has it space for all your pencils, markers, scissors and everything you want to put in, the hotend has the nozzle removed so that you can put in your favorite pen or pencil, like you see in the pictures below! Now you can make your favorite pen/pencil extra special!Building instructionsPutting the three parts together luckily isn't too much work! If you want to paint it I do reccomend painting it before putting it together. Here is the stuff you will need for this:Paint (Only if you want to paint it)Some hot glue/super glueStep 1Paint all the parts to your liking. The paint I used was: black, orange, white, gold and red.Step 2Remove the supports of the two parts of the hotend, if you haven't done that already.Step 3Glue the two parts of the hotend together with the hot glue/super glue.Step 4Remove the supports of the cup if you haven't done that already.Step 5Apply some hot glue/super glue into the two holes in the cup. Then stick the part of the X-axis that is sticking out of the hotend in the holes in the cup, so that the nozzle is facing downwards.Well done! You have fuly assembled your pencil cup and you are ready to put in everything you want! Please check out my other stuff at my account!https://www.printables.com/social/243307-klm1318/about