Prusa mini+ Lightbar Mod

prusaprinters

<p>Remix of a remix to fit this under counter lightbar: <a href="https://a.co/d/aLcCabf">https://a.co/d/aLcCabf</a>&nbsp;<br><br><i><strong>ASOKO LED Under Cabinet Lighting for Kitchen with Touch Sensor, USB Plug in Under Cabinet Lights, 12 inch Under Counter Lights for Kitchen,Daylight White 4500K, Under Desk Light</strong></i></p><p><i><strong>Dimensions:</strong> 0.78in (~19.82mm) W x 0.23in (~5.85mm) H x 12in (~305mm) L</i></p><p>------</p><p>&nbsp;</p><p>Modifications:</p><ul><li>modified lightbar slot to fit lightbar dimensions (above)</li><li>shortened the height of the mod, reducing material needed to print</li><li>added wire guide to direct power cord to the extruder bar where it can be further guided to power source</li><li>added two small holes for an M3 hex nut (only one needed) to prevent the lightbar from covering the power on/off/dimmer touch button</li></ul><p>Parts:</p><ul><li>M5x20 (2x) - to secure mod to top of extruder bar. unfortunately like the original part, the stock M5 screws that come with the prusa mini are too short</li><li>M3 Hex nut (1x) - not strictly necessary, but helps position the lightbar so the part does not cover the power button</li></ul><p>&nbsp;</p><p>Notes:&nbsp;</p><p>Printed using Prusament PETG (PLA also is fine); sliced using PrusaSlicer.<br>Orient the model so the text side is facing the print bed.</p><p>Infill: 10% gyroid (5% or more should be fine)<br>Supports: recommended*<br><br>* there is a small overhang dug into the “top” (when printing) of the model for the M3 hex nut inserts. the supports may not be needed, but for such a small area didn't try printing the model without them. these can be easily be removed with needle nose pliers<br><br>TinkerCAD link:&nbsp;<br><a href="https://www.tinkercad.com/things/bYRqBc1OttW">https://www.tinkercad.com/things/bYRqBc1OttW</a>&nbsp;</p>