Prusa Mini LCD Display Backing Cover - USB

prusaprinters

<p>This is a remix of the <a href="https://www.prusaprinters.org/prints/36645-prusa-mini-displaybox-cover-w-usb">Prusa Mini Displaybox Cover by 4inthonylin</a> to work with the <a href="https://www.prusaprinters.org/prints/40966-lcd-frame-usb-for-prusa-mini ">LCD Frame + USB for Prusa Mini created by Frank S</a></p><p>I love this LCD frame modification that includes the USB and I wanted to create a backing cover for this particular frame. It is an absolute perfect fit and protects the back of your LCD screen from any dirt and dust that might get back there.&nbsp;</p><p>You will need to remove the original (4) screws holding the LCD board and use (4) M3x12 screws to attach the backing cover.</p><p>I have uploaded two different files for this design. One is a very snug and tight fit, which you can see installed on my mini in the photos. It fits absolutely perfectly, just be patient and careful when installing and routing the USB cable through (this is the tightest fit). The other model has a larger cutout for the USB cable to make installation easier (I have not tested this model so please provide feedback for me if you choose this option on whether or not it was easier). &nbsp;</p><p><a href="https://www.amazon.com/dp/B07FY6Z8J7/ref=cm_sw_em_r_mt_dp_aATvFb51KKXMM"><strong>The USB cable I used for my screen can be found here</strong></a></p><p>Please post any questions in the comments, hope you enjoy!</p>