Prusa Mini Displaybox Cover W/ USB

prusaprinters

<p>Remixed Somnium's back cover to be a flat plate to simplify printing and overhangs. Also uses the screw holes for the circuit board to secure the back cover to prevent any rattling issues. Need to use 4 - M3x12mm screws to secure the back cover through the circuit board to the front. The screws securing the circuit board were very tight so keep that in mind.</p> <p>Added a USB version to hold this cable: <a href="https://www.amazon.com/gp/product/B07ZSZQNWP/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&amp;psc=1">https://www.amazon.com/gp/product/B07ZSZQNWP/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&amp;psc=1</a></p> <p>Slide the USB port into the holder until it snaps in, make sure the inner tabs line up to the channel on the usb.</p> <h3>Print instructions</h3><p>W/O USB<br/> Printed at 0.15 with PETG, 0.2mm will also work fine.</p> <p>W/ USB<br/> Print with Support for the usb tabs, use the 3MF for the support enforcers. Adjust the support pattern spacing to 0.2mm.</p>