Prusa Mini anti vibration feet

prusaprinters

<h4>Replacement feet for Prusa Mini.</h4><p>&nbsp;</p><p><strong>I recommend using </strong><i><strong>R5</strong></i><strong> for all feet! Also, be sure to increase the speed of infills from 80 to 90 mm/s as it's actually quieter (for me at least) with the higher speed.</strong></p><h4>&nbsp;</h4><h4><strong>Revision log</strong></h4><p>R1: Thinner ones<br>R2: Thicker ones with tighter/better fitment&nbsp;<br>R3: Even thicker ones with tighter/better fitment&nbsp;<br>R4: Modified Box, RR and FR for better weight balance and added position label within all of the models</p><p>R5: Made all the rail feet thinner. Box foot a bit higher. And some minor design changes.</p><p>I have uploaded the STEP file for R5 if anyone would like to remix them.</p><h4>&nbsp;</h4><h4>Placing the feet into position</h4><p>All feet have a position text “engraved” according&nbsp;</p><p>FL: Front Left</p><p>FR: Front Right</p><p>RL: Rear Left</p><p>RR: Rear Right</p><p>BOX: Under the Z-axis</p><p>&nbsp;</p><h4>Miscellaneous info:</h4><p>R4/R5 creates up to 10 dB less noise in the 3000-5000 mm/min range compared to R1-R3. It's still most noisy in that range though, so I suggest using 90mm/s for infills instead of the default 80mm/s, as 90 is actually quieter.</p><p>For the one under the control box, use "Box". I have only put it into place but you can add a small piece of glue to it if you want to.</p><p>Printed sideways with PETG on Prusa Mini with 0.2mm layer height.</p><p>Might be some minor flaws here and there so let me know in the comments if you find something, or feel free to remix it yourself :-)</p><p>Inspiration taken from <a href="https://www.thingiverse.com/thing:4079300">https://www.thingiverse.com/thing:4079300</a> and <a href="https://www.thingiverse.com/thing:2796596">https://www.thingiverse.com/thing:2796596</a></p><h3>&nbsp;</h3><h3>Special info for R1-R3</h3><p>The one named "Rails" are used for 3 of the corners, you will notice which ones as they only fit on 3 specific corners. On the one corner where they don't fit, use the "Odd" foot.</p><p>&nbsp;</p><h3>Print instructions</h3><h3>&nbsp;</h3><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p>&nbsp;</p><p><strong>Printer:&nbsp;</strong></p><p>Prusa Mini</p><p>&nbsp;</p><p><strong>Rafts:</strong></p><p>No</p><p>&nbsp;</p><p><strong>Supports:&nbsp;</strong></p><p>No</p><p>&nbsp;</p><p><strong>Resolution:</strong></p><p>0.2</p><p>&nbsp;</p><p><strong>Infill:&nbsp;</strong></p><p>100%</p><p><br><strong>Filament:</strong><br><br>AddNorth PETG Lucent Orange</p>