Prusa Leveling Guide Angle Finder

thingiverse

This Angle Finder (Angle Meter, or Protractor if you prefer) helps you finding the exact angle to rotate the bed screws on your [Nylock Mod](https://www.rearvuemirror.com/guides/nylock-mod-for-the-mk3s), when leveling the print bed using [Prusa Leveling Guide](https://plugins.octoprint.org/plugins/PrusaLevelingGuide/). **Besides the original version with 10° marks, a version with M3 screw pitch in millimeters has been added.** Print parts as oriented at 0.2 mm layer height, and set the filament change as follows: * **center.stl** - filament change at 0.6 mm * **dial.stl** and **dial-pitch-mm.stl** - filament change at 2.8 mm The Center Wheel should freely rotate inside the Dial, and the hex key should **snugly fit** through the Key-Core. The Key-Core should click into the Center Wheel. If you have difficulties passing the hex key through the core, lower the extrusion and print the core again. You can also change just the Key-Core if it wears out and your hex-key starts freely moving inside it.