Prusa LCD under shelf adapter
prusaprinters
Organize your Prusa Control! adapter to install the LCD assambly under a shelf. Installation: I ran my wires up and out of the electronics box and further up, flat against the back of the frame. To cover the gap from the printer to the shelf I used some cable sleeve, similar as the one provided with your printer. Honestly, I don't even notice de bundle going up anymore. Simply unscrew the LCD from the frame and leave the legs attached. The legs house the nuts and they will be re-used. Attach the adapters to the legs, mind the orientation, see pictures below. Attach the assembly to the shelf using 2-4 wood screws The gap to my shelf is 15cm and I still have cable left, so I estimate the shelf could be up to 25 cm. Print instructionsprinted at 0.2 with PLA with 15% infill proved sturdy enough.
With this file you will be able to print Prusa LCD under shelf adapter with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Prusa LCD under shelf adapter.