Prusa LCD Hinged Cover

thingiverse

This project is still a work in progress. The Prusa LCD Hinged Cover mounts the Prusa LCD display outside the Ikea Lack enclosure. A Fusion 360 file is attached, but note that the STLs are currently ten times larger than needed, so you'll need to scale them down in your slicer or use the included PrusaLcdCoverHinged.zip.amf file by clicking "No" during import - see the attached image for details. To print this project, you will need: * LcdCoverHinged.stl: a wider version of the original Prusa LCD cover with hinges at the top * LCDTopHinge.stl: attaches to the bottom of an Ikea Lack bottom tabletop * Hook.stl: holds the cover in place and needs improvement; there are two versions available, one with thin and thick central parts Required materials include: * 4 wood screws (3 for the upper hinge and 1 for the hook) * A piece of 4mm 165mm wire (the dimensions of the hinge hole) Improvements to consider: * Enhancing the hook * Reducing the diameter of the hinge hole to accommodate 1.75 mm filament