Prusa LACK Enclosure Levelling Feet

prusaprinters

<p><i>Update March 19, 2022: </i><a href="https://www.prusaprinters.org/prints/152650-improved-prusa-lack-enclosure-levelling-feet"><i><strong>Improved Prusa LACK Enclosure Levelling Feet</strong></i></a><i> are now available! &nbsp;I strongly recommend checking out this new version, as it features some improvements that make post-installation level adjustments far easier.</i></p><p>----------</p><p>I needed a way to level my LACK enclosures and keep them anchored in place, and these feet were the answer.</p><p>There are two versions of the feet to choose from:</p><p>The <strong>floor</strong> version has a hole with a chamfered edge <i>inside</i> the socket that allows the foot to be screwed into the floor.</p><p>The <strong>leg</strong> version has a hole with a chamfered edge <i>outside</i> the socket that allows the foot to be attached to the leg.</p><p>For either version, you can insert the provided levelling plates in various thicknesses to individual feet to correct for uneven floors if necessary.</p><h3>Print instructions</h3><p>Gcode files are sliced for Prusament PETG on an MK3/S using the <i>0.20mm SPEED MK3</i> setting. I used 50% infill for the <strong>socket</strong> pieces, and 10% infill, 2 bottom layers, 3 top layers and 3 perimeters for the <strong>plate</strong> parts.</p><p>3mf files have been provided for those who wants to do the slicing themselves. The Fusion 360 source file is also available in the files section, and is heavily parameterized for easy tweaking/adjusting.</p>