Prusa Lack Enclosure

prusaprinters

My version of Lack EnclosureIt is essentially a remix of zuspiel’s design: https://www.thingiverse.com/thing:2012384However, I incorporated the use magnets similar to what LKM did: https://www.thingiverse.com/thing:1843235Enclosure I built uses 3 lack tables, however if you just want the actual printer enclosure you won’t need the ‘Lvl 1’ parts.You will need to print the following:4 x ‘Lvl1_Leg Connector Bottom’4 x ‘Lvl1_Leg Connector Top’4 x ‘Lvl2_Leg-Connector-Bottom’4 x ‘Lvl2_Leg-Connector-Top’4 x ‘Top-Connector’16 x ‘Clip_wide’Additional materials:Acrylic sheets 20” x 21.5” x 1/16” (TAP Plastics in US does relatively cheap cut to size)Magnets: 1/4” dia. x 1/16” and 5/16” x 1/16” (I purchased from K&J Magnetics)ScrewsSuper glueAdditional designs used:Spool holder: https://www.thingiverse.com/thing:2486632Filament guide: https://www.thingiverse.com/thing:2228361Ikea Lack Grommet: https://www.thingiverse.com/thing:2225786General Construction Notes / Tips:Magnets are used for both the connectors and for the clips holding the acrylic.Only really need 2 screws for each connector, I found it was sturdy enough.Clips are super glued with magnets to acrylic.Print SettingsPrinter Brand:PrusaPrinter: i3 MK2SRafts:YesSupports: NoResolution:0.2mmInfill: 20% is more than enoughNotes:Rafts only recommended for printing clips.