Prusa i3 MK3S LCD Logo Cover Plate

prusaprinters

<p>(unofficial obviously) Exclusively for Prusa i3 MK3S (also MK3, 2, 2S, and 2.5) owners, this is a nice touch to add to your Prusa i3 MK3.</p><p>(See my MK3S+ separate entry as well. Note that the ones here are 84mm wide while the MKS3+ one is 79mm wide.)</p><p>-The raised dot in the letter 'i' cleverly works as the handle<br/>-The cover plate fits perfectly over your LCD<br/>-It blocks all LCD light in a lit room, and most light at night<br/>-The unit is has a thick baseplate, feels solid, and stays put due to its weight and friction<br/>-A raised border overlaps the orange cover to block light coming around the sides<br/>-It reminds you of the name of your printer in case you forget</p><p>This includes logos for all versions. I don't know if the LCD size is the same as MK3 but they all are that size.</p><p>Tip - check out one of the makes that uses a color switch with gold letters!</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p> </p><p><strong>Printer: </strong></p><p>I3 MK3S</p><p><strong>Rafts:</strong></p><p> </p><p>No</p><p> </p><p><strong>Supports: </strong></p><p>No</p><p><strong>Resolution:</strong></p><p> </p><p>.2</p><p> </p><p><strong>Infill: </strong></p><p>20%</p><p><br/><strong>Filament:</strong><br/>Prusa PETG Prusa Orange <br/> </p><p><strong>Notes: </strong></p><p>For PLA you should do 100% infill to make sure the 'i' is strong. For PETG you could do 20% infill. Pictured is orange PETG 20% infill .2 layer height and yellow PLA 100% infill .1 layer height.</p><p> </p><p> </p><p> </p><p> </p><p>Category: 3D Printer Accessories</p>