Prusa i3 MK3 Raspberry Pi Camera Mount

myminifactory

This is a case for the Raspberry Pi Cam v2, available here on Amazon. It's designed to mount to the X-carriage of the Prusa i3 MK3 with ease. The ball-and-socket joint provides increased rotational flexibility, allowing it to move freely in any direction. Assembly is a breeze, requiring mostly spare hardware from the Prusa i3 MK3 build kit. To assemble this case, you'll need: 3x M3x6mm socket head screws (you can use 8mms from your kit) 1x M3x40mm socket head screw 2x M3x25mm socket head screws (the only thing you'll need to buy) 1x M3 x 18mm socket head screw (use a 20mm screw from the kit or one of the 18mm's from the X-carriage) 5x M3 nuts One additional tip: I added a liner inside the case, printed out of flexible material, for extra padding and a snug fit. If you prefer, you can print it with rigid filaments instead - the camera will still fit just fine. The .stl files don't include the image on the face, as it's copyrighted, but feel free to add your own personal touch after assembly.