Prusa i3 clone Duet 2 wifi case

thingiverse

Duet Wi-Fi Case for a Prusa i3 Clone. This case was custom-designed from scratch in Fusion 360, drawing inspiration from notable work on Thingiverse, specifically: * https://www.thingiverse.com/thing:2812834 * https://www.thingiverse.com/thing:3356858 * https://www.thingiverse.com/thing:3789563 Note that this case has not been printed or tested for fit. The attached Fusion360 file provides a detailed design. The case is secured to the printer at four points, with two points near the bottom engaging with 3030 extrusions via T-nuts and the remaining two on the right-hand side requiring M3 bolts to fasten into a vertical aluminum frame. A 40x10mm fan can be accommodated at the base of the case, while the lid is secured by M3 bolts inserted into brass inserts in the lower section. Additionally, two mounting posts are provided for a buck converter (https://www.amazon.co.uk/gp/product/B07Q9PVQ7M/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1). Updates to the design include: * Version 2 of the base with a 0.5mm clearance for the lid (09/02/2020) * Version 3 of the base STL with enlarged cable routing holes near the base, accommodating cables with attached plugs (10/02/2020) * Updated files and added .step files for the base and lid (11/02/2020), along with an additional cutout to accommodate the frame end plate * Two holes added to the right side of the cooling duct for easier bolt installation on the vertical frame (22/02/2020)