PRUSA faceshield RC3 remix - "stacked"

thingiverse

Big thanks go to Josef Průša and the PRUSA company for this fantastic design! Important Note: Read the instructions before bringing it into circulation, as there are some crucial things you need to notice. Use the following link to get those: https://www.prusaprinters.org/prints/25857-prusa-protective-face-shield-rc2/files This design is not for selling in order to make a profit! PRUSA has made this statement: "We share these files under non-commercial license. It would be great if you donated these shields to those in need for free. If you need to cover your production costs, we are okay with you selling the shields for production cost. However, we do not want to see these shields on eBay for $50." This design is not for selling in order to make a profit! I decided to stack some "original PRUSA-faceshields" to avoid print interruption. You can use one of the templates that matches the height of your printer. Important Note: It is recommended not to stack more than four shields (because of the printing time). Because you have to wait until the print is finished and generally it's necessary to bring the shields into circulation as fast as possible. But if you do another job while the print is running, you can calculate it better. It is recommended to print it with 0.1mm to 0.3mm layer height! Integrated support can be cut away after printing or used for fixing the shields. Volume/Part Info: PRUSA faceshield x 8 (recommended for most printers like Prusa i3) PRUSA faceshield x 16 (recommended for printers with a high about 40 cm, like Prusa i3 plus)