Prusa Faceshield 0.8mm Stacked 4pcs/print - WORK IN PROGRESS!

prusaprinters

<p>We got many messages asking for a stacked print for the 0.8mm nozzle. Because we had some problems with our model we redesigned the Prusa Faceshield Stacked and redone the print settings to make it work with 0.8mm nozzle.</p> <p>THE VERSION IS NOT SAVE YET: We need you for testing!<br/> Since we cannot test it really well ourself we are relying on your feedback!<br/> Please be at your printer with the printer! It may fail !<br/> We would be very happy if you write to us about how the print worked.<br/> Thank you for that.</p> <p><a href="https://www.instagram.com/coronasolved/">https://www.instagram.com/coronasolved/</a></p> <h3>Print instructions</h3><p>If you don't know much about stacking please use our 3mf files!<br/> The faster print settings are from Prusa if you wanna go save use the slower print version because the Prusa speed is really fast!</p> <p>If your print board is to small for 4pcs you can remove the skirt... .</p> <p>Material: PETG<br/> layer hight: 0.55mm</p> <p>But please be aware, that this is still Work in Progress and can fail!<br/> We would be really happy if you write us feedback because we cannot really test the 0.8mm nozzle really well ourselves...</p>