Prusa Case for SKR 1.4 (UPDATED!)

thingiverse

If you run a print of one or both versions, please post an image of your print in place. I would love to see my design time wasn't a waste. Mod - 3-21-2021 Added a new base that can handle a 30mm fan. WARNING - when mounting the fan make sure the sticker is toward the base. This will make sure that the fan is pulling from the case and not pushing into the base so there will not be any worries that the part or bed will get unwanted cooling. Also added the Nylon Clamp V3 which will handle a larger diameter of combined cables without any new mods. Added a modified Upper Mount for this design. It was originally from the Bear Prusa Upgrade so the Lower Mount from that design is usable. I finally printed a test and found issues with the design. This is an updated design that is 100% correct. Added photo of final print. This design was created for the SKR V1.4. The design will accommodate the optional wireless card, has the opening for the USB connector and the Micro-SD card. While this case was redesigned for the use with the SKR-V1.4 and better functionality, it will work with the SKR-V1.3 as well. The door screw is set up for an M3 screw and hex nut with a very tight fit. The clamps are both created to be used with M2 screws and the base need to either be tapped after printing or carefully threaded using an M2 screw. Future additions to this design include the addition of a 30mm fan for forced ventilation. This can be used on the original Prusa as well as the Bear Upgrade. This design has the clamps used by the original design by Josef Prusa and they function the same way as the original design. I added a zip tie slot near the top on the inside for cleaner wire routing. The OpenSCAD design files are included in case anyone wants to download and make additional changes, please let me know of any upgrade mods you make and post a link to them for others. Enjoy, and let us all know how the prints work out so I can make changes if necessary. I haven't printed my own as of now, but will print them soon.