Prusa 623h Bearing Housing MTek Version

prusaprinters

<p>This bearing housing remix is to hold a single 623 ball bearing size:<br/> 3mm Inner Diameter<br/> 10mm Outer Diameter<br/> 4mm Thickness<br/> It also includes a plug that can be pressed into the open side after the bearing has been seated in the inner bore. This will prevent the bearing from shifting in the bore. This part is exactly the same dimensions as the bearing housing used on the Original Prusa i3 MK2, MK3 and MK3S kits. The size of the STL is set for printing on a Original Prusa i3 MK3 in ABS with the 0.20mm SPEED MK3 setting with 20% infill and Generate Support turned on.</p> <h3>Print instructions</h3><h3>Category: 3D Printer Parts Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.20mm</p> <p><strong>Infill:</strong> 20%</p> <p><strong>Filament:</strong> Generic ABS<br/> <strong>Notes:</strong></p> <p>The size of the STL is set for printing on a Original Prusa i3 MK3 in ABS with the 0.20mm SPEED MK3 setting with 20% infill and Generate Support turned on. At these setting the bearing holder will fitting of the bearing and plug with a slight interference press fit by hand.</p>