Protogen M16 mk3 V1.2

thingiverse

Protogen M16 mk3 V1.2 ~ The head can be made exclusively for personal use, resale is prohibited! ~ ---------------------------------------------------------------------------------------------------------------- The model is almost completely ready for production. Changes: 1 - The holes in the base have been changed to use M3 embedded brass nuts with a length of 6mm and an outer diameter of 4mm, I think it will not be difficult to find such, but the build quality will increase significantly, a picture of the nut is attached. Assembly requires 12mm M3 countersunk head screws. 2 - The base earpiece tip has been redesigned for easier installation with almost no post-processing. Removed extra holes in the upper part of the base. 3 - Improved front frame, removed excess plastic, added air vent for 40/10 or 50/10 mm fan. Changed fastenings for M3 screws. 4 - Added new inserts to the earphone to use the backlight with a diffuser and a stencil with your drawing. The stencil is applied to the back of the earpiece glass. 5 - Added a case for installing an LED strip or other light sources to illuminate the stencil insert. 6 - A new master model for vacuum forming of the visor has been added - MASTER 2. It spends half the amount of plastic and, as I found out, is stronger since it does not have a filling that leads to the splitting of the first master model. Changes in v1.2 1) The long-awaited back of the head has been added. (Attention of the model base l and k, although they are similar to the old ones, are fundamentally different) 2) Redesigned base models. Now the base consists of three (or two, if you have a large printer - use the combined version) parts of the base, front frame and inserts. 3) The model of the insert with a stencil now requires revision either in the program or by hand - you need to make a hole in the shape of the required pattern. ALL MODELS ARE ALREADY LOCATED OPTIMALLY, ALL YOU NEED IS TO ALIGN IT TO THE CENTER OF YOUR PRINTER You can change the model files, add your own inserts and customize the model in every possible way, the only condition is that you must provide a link to the original model - https://www.thingiverse.com/thing:4894173 Coming soon a version for LED P3 64/32 matrices ooooooooooohhhhhh))) P.S. I tried very hard to do everything very nicely and efficiently, I hope you enjoyed it UwU (I'm only seventeen yo) ---------------------------------------------------------------------------------------------------------------- The aim of the project is to popularize technical creativity, and, specifically, to make proto-suits. Why are proto-suits so rare? - Because their manufacture is much more difficult than the manufacture of conventional fursuits. There are many aspects of making a 3D model of the base, a complex vacuum forming process that requires the manufacture of special devices, a large amount of electronics, the ability to work with microcontrollers, and programming. What am I going to do here? - Help everyone who also dreams of a proto-suit. Specifically, to post to the public all the necessary 3D models, electronics soldering diagrams, firmware for microcolors, links to necessary goods, guides for making a suite. And everything is free, so that everyone has the opportunity to put together a proto-suit. Every few months I will make new models of prototypes so that everyone can find a model that they like. More on: https://vk.com/m16ind (preferably) Less on: https://twitter.com/M16Studios